机械专业英语试题及答案

课程 机械工程专业英语

课程性质（□必修□限选□任选） 考试方式（□闭卷□开卷）

一、选择题（在每题四个备选答案中选出一个正确答案，本大题共15小题，每小题1分，总计15分）

1. If all points in a linkage move in parallel planes the system undergoes planar motion and the linkage may be described as a . A. planar motion B. planar linkage C. joints D. slide

2. Though frame material and design should handle damping, are sometimes built into frame sections to handle specific problems.

A .beams B. holes C. dampers D. screw

3. The maximum allowable deflection of a shaft ______ determined by critical speed, gear, or bearing requirements.

A. often B. must C. was D. is usually

4. We will have to _____ to better and better solutions as we generate more information.

A. repeat many times B. iterating C. iterate D. try ways

5. If a product configuration is _______ specified and then examined to determine whether the performance requirements are met.

A. finally B. tentatively C. temporary D. have been

6. Manufacturing can be defined as the _____ of raw materials into useful products through the use of the easiest and lest-expensive methods.

A. transformation B. processing C. process D. transforming

7. The planer and knee types of milling machine is _____ because of its flexibility.

A. used most commonly B. most popular C. the most commonly used D. most powerful

8. As a result, the system will vibrate at the frequency of the _____ force regardless of the initial conditions or natural frequency of the system.

A. action B. excitation C. out D. act

9. Before two components are assembled together, the relationship between the dimensions of the mating surfaces_______.

A. must be giving out B. should printed clearly

C. must be specified D. should be clearly noted

10. The main practical advantage of lower pairs is their better ability to trap lubricant between their ______ surfaces.

A. enveloping B. mating C. outer D. outside

11. The word______ itself usually refers to the deterioration of metals and ceramics, while similar phenomena in plastics generally called ______.

A. recrystallization…. corrosion B. recrystallization…degradation

题 号 得 分 一 二 三 四 五 六 七 八 总 分 C. degradation…corrosion D. corrosion… degradation

12. Most frames _______ cast iron, weld steel, composition, or concrete.

A. are made from B. are made up of

C. was produced by D. was consist of

13. Rotating shafts particularly those that run at high speeds, must be designed to avoid operation at speeds.

A . low B .overload C. critical D. hollow 14. Although cast iron is a fairly cheap material, each casting requires a .

A. pattern B. model C. mold D. patent

15. The term is used to describe joints with surface contact, as with a pin surrounded by a hole.

A. high pair B. low pair C. surface pair D. rotary pair

二、完型填空（在每个小题四个备选答案中选出一个正确答案，本大题共15小题，每小题1分，总计15分）

The term shaft usually refers to a relatively long member of round cross section that rotates and transmits power. One or more members such as gears, sprockets, pulleys, and cams are usually (16) to the shaft by means of pins, keys, splines, snap rings, and other devices. These latter members are among the “associated parts” considered in this text, as are couplings and universal joint, which serve to (17) the shaft to the source of power or load.

A shaft can have a noround cross section, ant it need not necessarily rotate. It can be stationary and serve to (18) a rotating member, such as the short shafts that support the nondriving wheels of an automobile. The shafts supporting(19) gears can be either rotating or stationary depending on (20) the gear is attached to the shaft or supported by it through bearings.

It is apparent that shafts can be subjected to various combinations of axial, bending, and(21) loads, and that these loads may be static or fluctuating. Typically, a rotating shaft transmitting power is (22) to a constant torque (producing a mean torsional stress) together with a completely reversed bending load (producing an alternating bending stress).

In addition to satisfying (23) requirements, shafts must be designed so that deflections are within acceptable limits. Excessive (24) shafts deflection can hamper gear performance and cause (25) noise. The associated angular deflection can be very destructive to no-self- aligning bearings(either plain or rolling). (26) deflection can affect the accuracy of a cam or gear driven mechanism. Furthermore, the greater the flexibility -either lateral or torsional-the lower the corresponding (27) speed.

考生注意： 考试时间 120 分钟 试卷总分 100 分 共 5 页 第 1 页

专 业 班 级 学 号 装 姓 名 订

线

Sometimes members like gears and cams are made (28) with shaft, but more often such members (which also include pulleys, sprockets, etc)are made separately and then(29) shaft. The portion of the mounted member in contact with the shaft is the hub. Attachment of the hub to the shaft is made in variety of ways. A gear can be gripped (30) between a shoulder on the shaft and a spacer, with torque being transmitted through a key. The grooves in the shaft and hub into which the key fits are called keyways.

16、 A) cement B) attached C) connected D) concrete 17、 A) endure B) transmit C) serve D) connect 18、 A) support B) meet C) satisfy D) strong 19、 A) aims B) idler C) terminal D) tomb 20、 A) due to B) weather C) whether D) for

21、 A) elasticity B) torsional C) inertia D) acceleration 22、 A) subjected B)…connect C) and D) From

23、 A) deeply B) strength C) clearly understand D) long time 24、 A) identify B) cross C) round D) lateral 25、 A) lucrative B) objectionable C) attractable D) terrible 26、 A) Moment B)Torment C) Torsional D) Movement 27、 A) high B) critical C) first D) important 28、 A) work B) idealization C) integral D) simplification 29、 A) mounted onto B) refers C) referring to D) indicates 30、 A) deformations B) bending limits C) laternal D) axially

三、阅读理解（在每个小题四个备选答案中选出一个正确答案，填在题头的表中）（本大题共20小题，每小题2分，总计40分）

Text 1

Engineering design is a systematic process by which solution to the needs of humankind are

obtained .The process is applied to problems(needs) of varying complexity .For example, mechanical engineers will use the design process to find an effective, efficient method to convert reciprocating motion to circular motion for the drive train in an intnternal combustion engine; electrical engineers will use the process to design electrical generating systems using falling water as the power source; and materials engineers use the process to design ablative materials which enable astronauts to safely reenter the earth’s atmosphere.

The vast majority of complex problems in today’s high technology society depend for solution not on a single engineering discipline, but on teams of engineers, scientists, environmentalists, economists, sociologists, and legal personnel. Solutions are not only dependent regulations and political influence. As engineers we are empowered with the technical expertise to develop new and improved products and systems, but at the same time we must be increasingly aware of the impact of our actions on society and the environment in general and work conscientiously toward the best solution in view of all relevant factors.

Design is the culmination of engineering educational process; it is the salient feature that distinguishes engineering design is found in the curriculum guidelines of the Accreditation Board for Engineering and Technology(ABET).ABET accredits curricula in engineering schools and derives its membership from the various engineering professional societies. Each accredited curriculum has a well-defined design component which falls within the ABET statement on design

read as follows.

Engineering design is the process of devising a system, component, or process to meet desired needs. It is decision making process(often iterative),in which the basic sciences, mathematics, and engineering sciences are applied to convert resources optimally to meet a sated objectives and criteria, synthesis, analysis, construction ,testing, and evaluation. The engineering design component of a curriculum must include most of the following features : development of student creativity, use of open-ended problem statement and use of modern design theory and methodology, formulation of design problem statement and specification, consideration of alternative solutions, feasibility considerations, production process, concurrent engineering design, and detailed system descriptions. Further, it is essential to include a variety of realistic constraints such as economic factors, safety, reliability, aesthetics, ethics, and social impact.

31、what’s the main meaning of message (1)?

A) Engineering design is a systematic process B) materials engineer’s main work C) mechanical engineer’s has good idea D) electrical engineer’ main duty

32、In the author’s opinion, the design process is very complex and should taken into account many factors, from the message who should NOT join into the design team _______. A) environmentalists, B) sociologists C) engineers

D) Government officials

33、From the message, we can know the meaning of words “ABET ”(at line third paragraph) is _____. A) a set of accredits standard B) a kind of design method

C) a department of US government which responsible for engineering design D) A set of law

34、It can be concluded from the passage that in the exercise and training of student, which character of the following is NOT included in the curriculum ______. A) creativity B) new material C) ethics

D) economic factors

35、The title of the message is ______. A) the roles of engineers in manufacturing B) the importance of mechanical design C) engineering design

D) The process of machine design

TEXT 2

Working drawings are the complete set of standardized drawings specifying the manufacture and assembly of a product based on its design. The complexity of the design determines the number and types of drawings. Working drawings may be on more than one sheet and may contain written instructions called specifications.

Working drawings are blueprints used for manufacturing products. Therefore, the set of drawings must:(a) completely describe the parts, both visually and dimensionally;(b)show the parts in assembly;(3)identify all the parts; and (4)specify standard parts. The graphics and text information must be sufficiently complete and accurate to manufacture and assemble the product without error.

共 5 页 第 2 页

专 业 班 级 学 号 装 姓 名 订

线

Generally, a complete set of Working drawings for an assembly includes: (1) Detail drawings of each nonstandard parts.

(2) An assembly or subassembly drawing showing all the standard and nonstandard parts in a single drawing.

(3) A bill of materials (BOM). (4) A title block.

A detail drawing is a dimensioned, multiview drawing of a single part, describing the part’s shape, size, material, and surface roughness, in sufficient detail for the part to be manufactured based on the drawing alone. Detail drawings are produced from design sketches or extracted from 3-D computer models. They adhere strictly to ANSI standards and the standard for the specific company, for dimensioning, assigning part numbers, notes, tolerances, etc.

In an assembly, standard parts such as threaded fasteners and bearings are not drawn as details, but are shown in the assembly view. Standard parts are not drawn as details because they are normally purchased, not manufactured, for assembly.

For large assemblies or assembled with large parts, details are drawn on multiple sheets, and a separate sheet is used for the assembly view. If the assembly is simple or the parts are small, detail drawings for each part of an assembly can be placed on a single sheet.

Multiple details on a sheet are usually drawn at the same scale. If different scales are used, they are clearly marked under each detail. Also, when more than one detail is placed on a sheet, the spacing between details is carefully planned, including leaving sufficient room for dimensions and notes.

36. Based on the message, which of the follow is wrong ? A) standard parts needn’t drawn as details

B) for simple parts, sometimes needn’t to draw the detail working drawing C) for large assemblies details may drawn on multiple sheets

D) If different scales used in a single sheet, they should clearly marked under each detail 37. Working drawings for an assembly MAY NOT includes: ?

A) BOM B) title block

C) An assembly or subassembly drawing D) Detail drawings of all parts. 38. For detail drawing, Which one of the following statement is not true ? A) should not has different scales

B) Detail drawing can produced from design sketches or extracted from 3-D computer

models.

C) detail drawing is a dimensioned, multiview drawing of a single part D) should Adhere strictly to ANSI standards 39. From the message we can infer ANSI is ? A) a set of law B) a set of notification

C) an Organization D) IEEE government 40. The topic of the message is ? A) How to design working drawings.

B) working drawing’s character and the key influence of how to draw a working drawing C) In the design process, what should be considered? D) What is working drawing

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库机械专业英语试题及答案在线全文阅读。