77范文网 - 专业文章范例文档资料分享平台

汽车底盘零件焊接质量评价 - 图文(2)

来源:网络收集 时间:2019-04-22 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

SMTC 21549?2010

e1’-Bottom weld penetration of minimum welded seam f2-weld penetration of t2 member

e2’-Bottom weld penetration of maximum welded seam R-Rotation angle of welded seam

t1, t 2-member thickness

图1 角焊缝的几何图形

Figure 1 Geometrical Figure of Fillet

2.1.2 搭接角焊缝 见图2

2.1.2 Overlapping fillet See Figure 2

符号含义:

Symbol meaning:

a -额定焊缝厚度(焊高) f1 -t1构件的焊接熔深 S1, S2-t1 ,t2 构件焊缝厚度 f2 -t2构件的焊接熔深 SN-最小的,共同的焊缝厚度 t1, t 2-构件的厚度

a -rated welded seam thickness (welded seam height) f1 -weld penetration of t1 member

S1, S2-t1 and t2 member welded seam thicknesses f2 -weld penetration of t2 member

SN-minimum and common welded seam thickness t1, t 2-member thicknesses

图2 搭接角焊缝的几何图形

Figure 2 Geometrical Figure of Overlapping Fillet

2.1.3 斜角焊缝 见图3

2.1.3 Oblique fillet See Figure 3

打印、拷贝即为非受控文件,请核查最新版本

- Printed Copy is Uncontrolled – Check Issue is Current -

2

SMTC 21549?2010

符号含义:

Symbol meaning: f2 -t2构件焊接熔深

SN -焊缝厚度 t1, t 2-构件的厚度

f2 -weld penetration of t2 member

SN -Welded seam thickness t1, t 2-member thicknesses

图3 斜角焊缝的几何图形

Figure 3 Geometrical Figure of Oblique Fillet

2.1.4 塞焊 见图4

2.1.4 Slot welding See Figure 4

符号含义:

Symbol meaning:

fL -焊接熔深直径或长度,宽度 f2 -t2构件焊接熔深 ? -孔的直径 L×B—孔的长度×宽度 t1, t 2-构件的厚度

fL -diameter or length, width of weld penetration

打印、拷贝即为非受控文件,请核查最新版本

- Printed Copy is Uncontrolled – Check Issue is Current -

3

SMTC 21549?2010

f2 -weld penetration of t2 member ? -hole diameter L×B—hole diameter×width t1, t 2-member thicknesses

图4 塞焊的几何图形

Figure 4 Geometrical Figure of Slot Welding

2.1.5 多重搭接角焊缝 见图5

2.1.5 Multi-overlapping fillet See Figure 5

符号含义:

Symbol meaning: f3 -t3构件焊接熔深

SN1,SN2 -焊缝厚度 t1, t 2,t 3-构件的厚度

a1, a 2 -额定焊缝厚度(焊高) f3 -weld penetration of t3 member

SN1,SN2 -welded seam thicknesses t1, t 2,t 3-member thicknesses

a1, a 2 -rated welded seam thicknesses (welded seam height)

图5 多重搭接角焊缝的几何图形

Figure 5 Geometrical Figure of Multi-overlapping Fillet

2.1.6 有圆周截面的角焊缝 见图6

2.1.6 Fillet with circumferential section See Figure 6

打印、拷贝即为非受控文件,请核查最新版本

- Printed Copy is Uncontrolled – Check Issue is Current -

4

SMTC 21549?2010

S

符号含义:

Symbol meaning: f1 -t1构件焊接熔深 f2 -t2构件焊接熔深

S, SN -焊缝厚度 t,t 2-构件的厚度

a -额定焊缝厚度(焊高)

f1 -weld penetration of t1 member f2 -weld penetration of t2 member

S, SN -sealed seam thicknesses t,t 2-member thicknesses

a -rated welded seam thicknesses (welded seam height)

图6 有圆周截面的角焊缝的几何图形

Figure 6 Geometrical Figure of Fillet with Circumferential section

2.2 点焊连接 见图7

2.2 Spot welding connection See Figure 7

打印、拷贝即为非受控文件,请核查最新版本

- Printed Copy is Uncontrolled – Check Issue is Current -

5

SMTC 21549?2010

图7 点焊的几何图形

Figure 7 Geometrical Figure of Spot Welding 压痕直径 熔深 压痕深度 热影响区 熔核直径 Press diameter Fusion penetration Press depth Heat affecting area Nugget diameter 2.3 凸焊连接

指焊接螺栓,焊接螺母. 2.3 Projection welding

Refer to welding bolt and nut 3 评价方法及要求

3. Evaluation method and requirement 3.1目视检查

3.1 Visual inspection

3.1.1 焊缝、焊点

3.1.1 Welded seam and point

焊缝,焊点的外观,尺寸,位置,及焊缝的现有状况必须符合图纸及相关标准规定的要求。 (焊丝及保护气体的成份也要符合相关图纸及相关标准规定的要求)

Appearance, size, and position of welded seam and point, and also current condition of welded seam should conform to requirements of drawings and related standards. (Elements of filler metal and protection gas should conform to requirements of drawings and related standards as well)

3.1.2焊接飞溅

不允许有影响构件性能的焊接飞溅(参见图纸) 3.1.2 Welding spatter

There should be no welding spatter affecting member performance (refer to the drawings).

3.1.3 工序

进行100%的目检

3.1.3 Working procedure 100% visual inspection

3.2 试样制作及测量方法

3.2 Sample production and measuring method

3.2.1 气体保护焊接

根据在5.2节中的规定的位置切割试样。取样位置应避开起弧区和收弧区。切割面要打磨精细并用2%~20%的硝酸溶液进行表面腐蚀, 以便看见基体材料中焊接金属的熔深情况。将切片放在适当放大倍数(低倍)的光学镜下进行测量焊接熔深、焊缝厚度及焊接缺陷等。 3.2.1 Gas protection welding

Cut samples at the position stipulated in Section 5.2. Samples should not be made at arc-striking area and

6

打印、拷贝即为非受控文件,请核查最新版本

- Printed Copy is Uncontrolled – Check Issue is Current -

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说综合文库汽车底盘零件焊接质量评价 - 图文(2)在线全文阅读。

汽车底盘零件焊接质量评价 - 图文(2).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/zonghe/619141.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: