(有些项目为机器可选配置) General 常规信息 Option System Information 系统信息 Lists the the following: Description 中文 This section lists out the primary hardware features of 该选项列出系统的主要硬件信息。此处仅提供信息,the system. There are no configurable options in this section, only information. 无法修改。 ? 系统信息 o BIOS 版本 o 机器编号 o 资产编号 o Ownership编号 o 出厂日期 o Ownership日期 ? 内存信息 ? System Information o BIOS Version o Service Tag o Asset Tag o Ownership Tag o Manufacture Date o Ownership Date ? Memory Information o 安装内存容量 o 可用内容容量 o 当前内存频率 o Memory通道 o Memory技术 o DIMM A尺寸 o DIMM B尺寸 ? CPU信息 o Memory Installed o Memory Available o Memory Speed o Memory Channel Mode o Memory Technology o DIMM A Size o DIMM B Size ? Processor Information o CPU型号 o CPU核数(几核) o CPU ID o 当前时钟频率 o 最小时钟频率 o 最大时钟频率 ? 设备信息 o Processor Type o Core Count o Processor ID o Current Clock Speed o Minimum Clock Speed o Maximum Clock Speed ? Device Information o 主硬盘容量 o 光驱型号 o 系统eSATA设备 o Dock eSATA设备 o o 显卡 o 显卡BIOS版本 o 显存大小 o 液晶屏类型 o 分辨率 o o 声卡 o Modem控制器 o Wi-Fi 设备型号 o Primary Hard Drive o Modular Bay Device o System eSATA Device o Dock eSATA Device o o Video Controller o Video BIOS Version o Video Memory o Panel Type o Native Resolution o o Audio Controller o Modem Controller o Wi-Fi Device o Cellular Device o Bluetooth Device Battery Information 电池信息 Boot Sequence 启动顺序 o Cellular Device o 蓝牙 Indicates the primary battery and the media bay battery status. Also displays the AC adapter type connected to the system. The computer attempts to boot from the sequence of devices specified in this list: 侦测主电池和第二块电池状态,也显示AC 外接电源的型号。 计算机尝试从以下列表顺序启动: ? ? ? ? ? ? ? Diskette drive USB Storage Device CD/DVD/CD-RW Drive. Internal HDD (IRRT) Cardbus NIC Onboard NIC 软驱 USB存储设备 光驱 Internal HDD (IRRT) Cardbus NIC Onboard NIC ? ? ? ? ? 我们可以勾选需要启动的设备。并在界面右侧对显示This list specifies the order that the BIOS searches devices when trying to find an operating system to boot. To change the boot order, select the device to be changed in the list then click the up/down arrows or use 我们可以通过选择UEFI BIOS启动,点击“Add the keyboard PgUp/PgDn keys to change the boot order Boot Option”自定义启动选项。 of the device. The boot devices can also be de-selected from the list using the check boxes. This also where the UEFI boot option can be enable or disable. Date/Time Displays current date and time settings. 日期/时间 System Configuration 系统配置 Option Description 描述 启用或禁用主板LAN控制器;设置有: Enables or disables the onboard LAN controller. The Integrated NIC 集成网卡 Default setting: Enabled w/PXE settings are Disabled, Enabled and Enabled w/PXE. 禁用, 启用 或启用w/PXE; 默认设置是启用w/PXE 显示当前的日期和时间 的设备设置启动的顺序,可以通过鼠标也可以通过上下键选择。 This field determines how the parallel port on the Parallel Port 并口 Default setting: ECP This field determines how the integrated serial port Serial Port 串口 Default setting: COM1 This option configures the operating mode of the SATA Operation SATA设置 internal SATA hard drive controller. The settings are Disabled, ATA, AHCI, and RAID On. Default setting: RAID On = SATA is configured to support RAID mode Use the check boxes to enable/disable the following devices: operates. The settings are Disabled, COM1, COM2, COM3 and COM4. docking station operates. The settings are Disabled, AT, PS2 and ECP. 并口设置选项: 禁用,AT,PS2 和ECP 默认设置是ECP。 串口设置选项: 禁用,COM1,COM2,COM3,COM4 默认设置是COM1 SATA Operation 设置选项: 禁用,ATA , AHCI 和 Raid On 默认设置是 Raid On=SATA 设置支持Raid 请点击复选框启用/禁用下面设备: ? ? ? Miscellaneous Devices 多种设备设置 Internal Modem Module Bay ExpressCard or PC Card Media Card, PC Card and 1394 External USB Port Microphone eSATA Ports Hard Drive Free Fall Protection Camera / Microphone 内置Modem 模块设备 ExpressCard或 PC Card SD卡, PC卡和1394 外置USB口 内置麦克风 eSATA口 自由落体硬盘保护 摄像头 / 麦克风 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 默认所有设备启用。 Default setting: All enabled. This field lets you choose the operating mode of the Latitude On?; Reader Default setting: Enabled Keyboard Illumination 键盘背景光(如没有配置背景光键盘该项不会出现) This field lets you choose the operating mode of the keyboard illumination feature. Settings are Disabled, Auto ALS and Input and Auto Input Only Default setting: Disabled Video 显示设置 Option Description 描述 禁用,自动ALS调节,自动调节 默认设置禁用键盘背景光。 Latitude On?; Reader. 启用或禁用Latitude On Reader 默认启用Latitude On Reader。 键盘背景光设置选择: Enabling ambient light sensor will allow your system to Ambient Light Sensor 环境感光器 Default setting: Disabled LCD Brightness LCD亮度 This option (represented by a slider bar for On Battery and On AC) sets the panel brightness when the ambient light sensor is off. Security 安全设置 Option Admin Password 管理员密码 Description This field lets you set, change, or delete the \several security features when set including: 描述 该页面可以设置,修改,或删除Admin 密码。设置在环境观光器关闭时,可以分别设定连接电源或电池时显示器的亮度。 automatically change the brightness of your system's LCD panel based on the amount of light in the environment. 自动根据周围环境改变显示器的亮度 默认设置禁用。 administrator (admin) password (sometimes called the 了Admin密码将启用下面安全功能: ? ? ? ? 限制改变BIOS设置 限制F12启动菜单的设备 禁止修改Owner和Asset编号 在POST界面可以替代system password ? ? Restricts changes to the settings in Setup Restricts the boot devices listed in the F12 Boot Menu to those enabled in the \field. ? ? Prohibits changes to the owner and asset tags. 默认没有设置Admin 密码。 Substitutes for the system password if the system prompts for a password during power 注意:如果删除Admin 密码,System 密码也被删除。Admin密码可以被使用去删除硬盘密码。但on. 是必须首先设置Admin密码;如果已经设置了Successful changes to this password take effect immediately. Default Setting: Not set ☆ NOTE: If you delete the admin password, the system password is also deleted. Also, the admin password can be used to delete the HDD password. For this reason, you cannot set an admin password if a system password or HDD is already set. The admin password must be set first if used in conjunction with a system and/or HDD password. System密码或硬盘密码,不能再设置Admin密码。 System Password This field lets you set, change, or delete the system 系统密码 该页面可以设置,修改,或删除System 密码。(之password (previously called the \前版本将Primary密码) Default Setting: Not set 默认没有设置System密码。 This field lets you set, change, or delete the password 该页面可以设置,修改,或删除硬盘密码。硬盘密码on the system's internal hard disk drive (HDD). Internal HDD Password 内置硬盘密码 a system restart. The HDD password travels with the hard drive, so the HDD is protected even when installed 默认没有设置硬盘密码。 in another system. Default Setting: Not set This option lets you bypass the system and internal HDD password prompts during a system restart or when resuming from a standby state. Settings are Password Bypass 密码跳过 Disabled and Reboot Bypass 在系统重启或者休眠恢复状态,让你绕过硬盘和System密码。设置选项:禁用和重启绕过。 将跟随硬盘,将硬盘连接到其他机器,也需要输入硬Successful changes take place immediately and require 盘密码。 The system will always prompt for the set system and 系统关机到开机(冷启动时),仍然需要输入密码。internal HDD password when powered on from an off state (cold boot). Default Setting: Disabled This option lets you determine whether changes to the System and HDD passwords are permitted when an 该选项启用后是在设置了Admin密码后,可以对系统和硬盘密码进行修改和设置,但不能修改BIOS其他项目; 默认选择允许对非Admin密码修改。 可以在需修改的页面的点击Unlock后,输入Admin密码对BIOS进行修改。 默认设置:禁用 Password Change Admin password is set. Use the check box to allow or disallow changes. 密码修改设置 Default Setting: Allow Non-Admin Password Changes checked This option enforces strong passwords. If enabled, all passwords must contain at least one uppercase Strong Password 强安全密码 character, one lowercase character and be at least 8 characters long. Enabling this feature automatically changes the default minimum password length to 8 characters Default Setting: Disabled This option lets you control whether the Trusted Platform Module (TPM) in the system is enabled and TPM Security TPM安全设置 visible to the operating system. When disabled (check box is empty), the BIOS will not turn on the TPM during POST. The TPM will be non-functional and invisible to the operating system. When enabled (check box filled) the BIOS will turn the TPM on during POST so the it can 启用强大密码功能,所有的密码设置时必须包括至少一个大写字母和一个小写字母,至少8位。 默认禁用。 TPM模块在中国大陆区域没有提供。该项让您控制是否在操作系统下是否启用或者可见TPM。 当禁用TPM (复选框为空),在POST界面,BIOS不能启用TPM。在操作系统下,TPM不可见,无功能。 当启用TPM,在POST界面,BIOS即可启用TPM,
百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说综合文库戴尔DELL笔记本最新BIOS 中英文对照表 - 图文在线全文阅读。
相关推荐: