77范文网 - 专业文章范例文档资料分享平台

vray物理相机英汉对照教程 - 图文(2)

来源:网络收集 时间:2019-06-05 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

Shutter speed is usually set in fractions of a second 1/200, 1/100, 1/30, etc. (in Vray Physical Camera the “1/” part is set by default so if you set the shutter speed to 50 it’s actually set to 1/50th of a second).

快门速度通常设置在几分之一秒内1/200、1/100、1/30,等等。(在Vray物理相机“1 /”部分是缺省设置的,所以如果你设定快门速度为50实际上设置为1/50秒)。

F/Number (Aperture) sets the diameter of the hole in the lens that let’s the light in. F /号码(孔径)设置镜头孔的直径,光线的入口。

Larger opening let’s in more light and makes the image brighter, as well as increasing the DOF effect.

更大的开口让我们放进更多的光,使图像更亮,以及增加景深效果。

These numbers work in reverse so increasing the aperture value actually decreases the size of the hole!

这些数字反向工作的因此增加孔径值实际上降低了孔径的大小!

This means that f2 is brighter than f8 and f8 is brighter than f16 (you get the point!). 这意味着f2比f8更亮,f8比f16更亮(你懂的~ !)。

ISO just controls the sensitivity of the film/sensor. Higher sensitivity means brighter image, lower means darker image.

ISO仅仅控制传感器的灵敏度。高敏感性意味着图像更亮,降低则反之。

VRay artists are actually very lucky compared to real photographers – in real world increasing the ISO means increasing the image noise, so it’s limited in it’s use.

VRay艺术家实际上是非常幸运的相对真正的摄影师——在现实世界增加ISO意味着增加图像噪点,所以它的作用有限。

For us however it doesn’t have this drawback! 然而我们没有这个缺点!

You can increase (or decrase) this value as much as you want without any negative effects! 你可以增加(或减小)这个值就但是没有任何负面影响!

ISO is the most flexible way to adjust the exposure – it doesn’t affect anything else except the brightness of your render!

ISO是最灵活的方式来调整曝光——它不会影响任何其它东西除了亮度的渲染!

“Ok, but how do I set the exposure for my render?!” “好吧,但我如何给我的渲染设置曝光呢? !”

Here’s a how you should do it – First decide if you will use camera DOF and Motion Blur (many people choose to add them only in post-production).

以下是你应该如何做,首先决定你将是否使用相机景深和运动模糊(许多人选择在后期制作添加)。

Adjust the F/Number to get the desired amount of DOF, adjust the Shutter Speed to get the desired amount of Motion Blur and finally use the ISO to get the desired Exposure of the image. 调整F /x获得所需的DOF,调整快门速度获得所需的动态模糊,最后使用ISO获得所需的曝光值。

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说综合文库vray物理相机英汉对照教程 - 图文(2)在线全文阅读。

vray物理相机英汉对照教程 - 图文(2).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/zonghe/648622.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: