American Welding Society & Moody International China
Q 1-18焊接检验师考试包括三个部分，每部分二个小时
The CWI exam contains three parts, each two hours long。
a. 是 （True） b. 不是 (False)
Q 1-19 AWS标准 A3.0的标题是：
The title of the AWS Standard, A3.0 is:
a. 填充金属规范 (Filler Metal Specifications)
b. 标准焊接术语和定义 (Standard Welding Terms and Definitions) c. CWI认证指南 (Guide to CWI Certification) d. 无以上任一 (None of the above)
Q 1-20 API标准包括1104越野桥的制造：
API Standard 1104 covers the fabrication of cross-country bridges.
a. 是 (True) b. 不是 (False)
Q 1-21 被批准用于CWI考试开卷部分的规范或标准是D1.1，API1104，AWS D1.5和AWS D15.1. Some of the approved codes/standards for the open book portion of the CWI exam are AWS D1.1, API 1104, AWS D1.5 and AWS D15.1
a. 是 (True) b. 不是 (False)
Q 1-22 在开始安排一项工作前，一个焊接检验师应决定：
Prior to starting a job assignment, the welding inspector should determine:
a. 所要用的规范，标准或技术要求 (What code, standard or specification) b. 应该做哪些检验 (What inspections should be conducted) c. 什么时候做 (When inspections should be conducted) d. 记录应保存在哪里 (Where records are maintained) e. 所有以上 (All of the above)
Page 1 of 9 Workbook
American Welding Society & Moody International China
Welding Inspection Technology Workbook 焊接检验技术工作手册
Module 2 第二单元
Safe Practices for Welding Inspectors 焊接检验师的安全实践
请不要在此书上书写! Don’t write in this book!
Page 1 of 9
Workbook
American Welding Society & Moody International China
Q 2-1焊接检验师会暴露在下列哪一个危险中：
The welding inspector is exposed to which of the following safety hazards:
a. 辐射 (Radiation)
b. 落下的物体 (Falling objects) c. 电击 (Electrical shock) d. 眼睛伤害 (Eye hazards) e. 所有以上 (All of the above)
Q 2-2 有关焊接和切割安全的文件在下列哪一个规范中： A document which covers safety in welding and cutting is:
a. AWS D1.1 b. API 1104
c. ANSI/ASC Z49.1 d. ASME Section VIII e. ASME B31.3
Q 2-3 在一个有效安全和健康程序中最重要的部分：
The most important component of an effective safety and health program is:
a. 安全规则 (Safety rules)
b. 安全规程 (Safety procedures) c. 保护设施 (Protective equipment) d. 焊接面罩 (Welding helmet)
e. 管理支持 (Management support)
Q 2-4 在下列哪个标准的条款中，安全培训是强制： Safety training is mandated under provisions of:
a. AWS “安全实践” (AWS “Safe Practices”) b. OSHA
c. ASME 规范 (ASME Code)
d. 焊接手册第二册 (Welding Handbook, Volume 2) e. 无以上任一个 (None of the above)
Q 2-5 缩写词“MSDS”是什么意思：(The abbreviation ?MSDS? means:)
a. 管理支持和日常安全 (Management Support and Daily Safety)
b. 材料强度及不连续的钢板 (Material Strength and Discontinuity Sheet) c. 材料安全数据单 (Material Safety Data Sheet)
d. 材料强度及数据单 (Material Strength and Data Sheet) e. 无以上任一个 (None of the above)
Page 1 of 9
Workbook
American Welding Society & Moody International China
Q 2-6 缩写词“TLV”的意思 (The abbreviation “TLV” means:)
a. 总线性量 (Total Linear Volume) b. 临界限制值 (Threshold Limit Value) c. 附加长度值 (Tack Length Value)
d. 临界限定阀 (Threshold Limiting Valve) e. 无以上任一个 (None of the above)
Q 2-7 雇主必须使所有雇员都能得到可用的MSDS数据：
Employers must make all applicable MSDS data available to their employees.
a. 是 (True) b. 不是 (False)
Q 2-8员工必须培训以认识安全危害：(Personnel must be trained to recognize safety hazards)
a. 是 (True) b. 不是 (False)
Q 2-9 下列哪个工序要求有一个热加工许可证 (A ?Hot Work Permit? is required for:)
a. 所有焊接操作 (All welding operations) b. 所有切割操作 (All cutting operation) c. 所有预热操作 (All preheating operation) d. 在焊接，切割或预热过程中可能会出现火灾的区域 (Areas where a fire hazard may occur during
a welding, cutting, or preheating operation) e. 所有以上 (All of the above)
Q 2-10 在焊接操作中存在下列哪些对眼睛的危害
(Eye hazards found in welding operations include) a. 飞溅颗粒 (Flying particles) b. 辐射 (Radiation)
c. 烟雾 (Smoke and fumes)
d. 所有以上的 (All of the above)
Q 2-11 不适合于防止眼睛受到焊接辐射伤害的保护设施：
(Protective equipment not suitable for eye protection from welding radiation includes)
a. 带有滤光板的焊接面罩 (Welding helmets with filter plates) b. 清晰安全的护目镜 (Clear safety goggles)
c. 带有滤光板的安全护目镜 (Safety goggles with filter plates) d. 防护屏 (Protective screens)
e. 适当分布的屏障 (Properly positioned barricades)
Page 1 of 9 Workbook
American Welding Society & Moody International China
Q 2-12 在焊接和切割操作中合适的衣服材料：
(Suitable clothing materials for welding and cutting are) a. 65%棉，35%聚脂 (65% cotton, 35% polyester) b. 毛 (Wool)
c. 化学处理后的棉 (Chemically treated cotton) d. 以上b&c (b and c above)
e. 无以上任一 (None of the above)
Q 2-13在一台去掉机械防护罩的设备上开始工作前，一个“停机，标识和试用”程序应该完成：(Before working on equipment where machinery guards have been removed, a ?Lock, Tag, and Try? procedure should be completed.)
a. 是 (True) b. 不是 (False)
Q 2-14 在焊接期间，为了避免烟雾，最重要的因素是：
(In avoiding fumes during welding, the most important factor is)
a. 母板的形式 (The type of base metal)
b. 填充金属的形式 (The type of filler metal)
c. 焊接工艺的形式 (The type of welding process) d. 焊机的位置 (The position of the welding machine) e. 焊工的头部位置 (The position of the welder?s head)
Q 2-15 在焊接和切割操作中，通风并不重要
(It is not important to consider ventilation during welding and cutting operations.)
a. 是 (True) b. 不是 (False)
Q 2-16 当进入一个狭窄的空间，不需要一名后备人员
(When entering confined spaces, a ?standby? is not required.)
a. 是 (True) b. 不是 (False)
Q 2-17 焊工可能暴露于某些有毒的材料：(Some of the toxic materials the welder may be exposed to are)
a. 镉 (Cadmium) b. 氯 (Chromium) c. 镍 (Nickel) d. 铅 (Lead)
e. 所有以上 (All of the above)
Page 1 of 9 Workbook
百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库4 - CWI考题(Chinese& - English) - 图文(2)在线全文阅读。
相关推荐：