77范文网 - 专业文章范例文档资料分享平台

Redhat 6.2(x86_64)+oracle10g(RAC)+asm安装配置(7)

来源:网络收集 时间:2019-03-10 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

最后如下:此处不要点击OK,直到下面操作进行完后再点击OK。

重点注意下操作: 依据该窗口提示:

第一行脚本先后在两个节点操作(可开两个终端窗口,以ROOT用户执行)。 第二行脚本在YCWEB1节点执行时,

如下,当执行到Expecting the CRS daemons to be up within 600 seconds时,需另开一终端以root用户如下操作(不要等待失败退出再执行): [root@ycweb1 etc]# /etc/init.d/init.evmd run & [1] 21952

[root@ycweb1 etc]# /etc/init.d/init.cssd fatal & [2] 22035

[root@ycweb1 etc]# /etc/init.d/init.crsd run & [3] 22121

正常执行root.sh脚本后结果如下:

[root@ycweb1 ~]# /rdbm/orasrv/product/10g/crs/root.sh

WARNING: directory '/rdbm/orasrv/product/10g' is not owned by root WARNING: directory '/rdbm/orasrv/product' is not owned by root WARNING: directory '/rdbm/orasrv' is not owned by root WARNING: directory '/rdbm' is not owned by root

Checking to see if Oracle CRS stack is already configured Setting the permissions on OCR backup directory Setting up NS directories

Oracle Cluster Registry configuration upgraded successfully

WARNING: directory '/rdbm/orasrv/product/10g' is not owned by root WARNING: directory '/rdbm/orasrv/product' is not owned by root WARNING: directory '/rdbm/orasrv' is not owned by root WARNING: directory '/rdbm' is not owned by root Successfully accumulated necessary OCR keys.

Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.

node : node 1: ycweb1 ycweb1-priv ycweb1 node 2: ycweb2 ycweb2-priv ycweb2

Creating OCR keys for user 'root', privgrp 'root'.. Operation successful.

Now formatting voting device: /dev/raw/raw3 Now formatting voting device: /dev/raw/raw4 Now formatting voting device: /dev/raw/raw5 Format of 3 voting devices complete.

Startup will be queued to init within 90 seconds. Adding daemons to inittab

Expecting the CRS daemons to be up within 600 seconds.

CSS is active on these nodes. ycweb1

CSS is inactive on these nodes. ycweb2

Local node checking complete.

Run root.sh on remaining nodes to start CRS daemons.

同样在节点ycweb2上执行root.sh脚本如上操作,执行结果如下: # /rdbm/orasrv/product/10g/crs/root.sh

WARNING: directory '/rdbm/orasrv/product/10g' is not owned by root WARNING: directory '/rdbm/orasrv/product' is not owned by root WARNING: directory '/rdbm/orasrv' is not owned by root WARNING: directory '/rdbm' is not owned by root

Checking to see if Oracle CRS stack is already configured

Setting the permissions on OCR backup directory Setting up NS directories

Oracle Cluster Registry configuration upgraded successfully

WARNING: directory '/rdbm/orasrv/product/10g' is not owned by root WARNING: directory '/rdbm/orasrv/product' is not owned by root WARNING: directory '/rdbm/orasrv' is not owned by root WARNING: directory '/rdbm' is not owned by root clscfg: EXISTING configuration version 3 detected. clscfg: version 3 is 10G Release 2.

Successfully accumulated necessary OCR keys.

Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.

node : node 1: ycweb1 ycweb1-priv ycweb1 node 2: ycweb2 ycweb2-priv ycweb2

clscfg: Arguments check out successfully.

NO KEYS WERE WRITTEN. Supply -force parameter to override. -force is destructive and will destroy any previous cluster configuration.

Oracle Cluster Registry for cluster has already been initialized Startup will be queued to init within 90 seconds. Adding daemons to inittab

Expecting the CRS daemons to be up within 600 seconds.

CSS is active on these nodes. ycweb1 ycweb2

CSS is active on all nodes.

Waiting for the Oracle CRSD and EVMD to start

Oracle CRS stack installed and running under init(1M) Running vipca(silent) for configuring nodeapps

/rdbm/orasrv/product/10g/crs/jdk/jre//bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

此处的error: libpthread.so.0: cannot open shared object file 可以不理会,但是要如下操作:

1)以orasrv用户编辑vipca文件找到(两台节点都需要做):

if [ \ then

LD_ASSUME_KERNEL=2.4.19 export LD_ASSUME_KERNEL fi

unset LD_ASSUME_KERNEL //增加该行

#End workaround

2)以orasrv用户编辑srvctl文件(两台节点都需要做):

LD_ASSUME_KERNEL=2.4.19 export LD_ASSUME_KERNEL

unset LD_ASSUME_KERNEL //增加该行 # Run ops control utility

3) 在ycweb1节点上,su到root用户执行#./vipca,报错信息如下:

Error 0(Native: listNetInterfaces:[3]) Error 0(Native: listNetInterfaces:[3]) 执行下操作:

[root@ycweb1 bin]# oifcfg setif -global bond0/10.36.106.0:public

[root@ycweb1 bin]# oifcfg setif –global bond1/10.10.2.0:cluster_interconnect [root@ycweb1 bin]# oifcfg getif //查看当前节点的网口信息 bond0 10.36.106.0 global public

bond1 10.10.2.0 global cluster_interconnect [root@ycweb1 bin]# export LANG= [root@ycweb1 bin]# ./vipca 该过程如下:

点击NEXT,

点击NEXT,配置如下:

点击NEXT

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说综合文库Redhat 6.2(x86_64)+oracle10g(RAC)+asm安装配置(7)在线全文阅读。

Redhat 6.2(x86_64)+oracle10g(RAC)+asm安装配置(7).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/zonghe/512006.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: