IFI第七版紧固件标准目录 - 图文

IFI第七版紧固件标准目录

发布时间：2007-01-25 标准代号 A部分：螺纹 ANSI/ASME B1.7M 1984(R 2001) NOMENCLATURE，DEFINITIONS，AND 螺纹的术语、定义和字母代号 LETTER SYMBOLS FOR SCREW THREADS ASME B1.1 2003 UNIFIED INCH SCREW THREADS(UN AND UNR THREAD FORM) ASME B1.3M 1992(R 2001) 统一英制螺纹(UN和UNR螺纹形状) 标准名称（英文） 标准名称（中文） SCREW THREAD GAGING SYSTEMS FOR 尺寸接受的螺纹测量系统 英制DIMENSIONAL ACCEPTABILITY－INCH 和米制螺纹（UN, UNR, 和SCREW THREADS(UN,UNR,AND UNJ) UNJ） 统一螺纹的量规和测量 ANSI/ASME B1.2 1983(R GAGES AND GAGING FOR UNIFIED 2001) ASME/ANSI B1.12 1987(R2003) ASME B1.15 1995 UNIFIED INCH SCREW THREADS(UNJ THREAD FORM) B部分：材料和涂镀 IFI IFI IFI IFI IFI-140 2000 SELECTING FASTENER MATERIAL BOLT AND NUT COMPATIBILIITY CORROSION PLATINGS AND COATINGS CARBON AND ALLOY STEEL WIRE,RODS,AND BARS FOR MECHANICAL FASTENERS SAE J429 1999 MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS ASTM A307 2004 INCH SCREW THREADS CLASS 5 INTERFERENCE-FIT THREAD 第5级过盈配合螺纹 统一英制螺纹(UNR螺纹形状) 紧固件材料选择 螺栓和螺母的匹配 腐蚀作用 镀层和涂层 用于机械紧固件的碳素钢和合金钢的线材，圆钢，钢棒 外螺纹紧固件的机械和材料要求 Standard Specification for Carbon Steel 碳素钢外螺纹紧固件 Bolts and Studs, 60 000 PSI Tensile Strength ASTM A449 2004b Specification for Hex Cap Screws, Bolts, 经淬火和回火的钢制螺栓和螺柱 and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use ASTM A320/A320M-2005a ALLOY STEEL BOLTING MATERIALS FOR 低温用合金钢和不锈钢螺栓材料 LOW TEMPERATURE SERVICE ASTM A193/A193M-2006 Alloy-Steel and Stainless Steel Bolting 高温高压用合金钢和不锈钢螺栓标准代号 标准名称（英文） Materials for High Temperature or High 材料 Pressure Service and Other Special Purpose Applications 标准名称（中文） ASTM A194/A194M-2006b CARBON AND ALLOY STEEL NUTS FOR 高压或高温作业或者高压高温作BOLTS FOR HIGH PRESSURE OR HIGH 用用螺栓的碳钢和合金钢螺母 TEMPERATURE SERVICE,OR BOTH ASTM A354-2004 QUENCHED AND TEMPERED ALLOY STEEL BOLTS,STUDS,AND OTHER EXTERNALLY THREADED FASTENERS 淬火和回火合金钢螺栓、双头螺栓和其它外螺纹紧固件 ASTM F593-2002e2 STAINLESS STEEL BOLTS,HEX CAP SCREWS,AND STUDS 不锈钢螺栓、六角帽螺钉和柱头螺栓 普通有色金属螺栓、六角帽螺钉和螺柱 ASTM F468-2006 NONFERROUS BOLTS,HEX CAP SCREWS,AND STUDS FOR GENERAL USE ASTM A563-2004a ASTM F594 2002 ASTM F467-2006 CARBON AND ALLOY STEEL NUTS STAINLESS STEEL NUTS 碳素钢和合金钢螺母 不锈钢螺母 NONFERROUS NUTS FOR GENERAL USE 通用非金属螺母 ASTM F788/F788M-2006 Surface Discontinuities of Bolts, Screws, 螺栓、螺钉和螺栓表面缺陷 and Studs, Inch and Metric Series ASTM F812/F812M-2003 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series ASTM F606-2006 TEST METHODS FOR DETERMINING THE 测定外螺纹和内螺纹紧固件、垫MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS,WASHERS,AND RIVETS ASTM B633-1998e1 ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL ASTM A153/A153M-2005 ZINC COATING(HOT-DIP)ON IRON AND 钢铁构件镀锌层（热浸） STEEL HARDWARE ASTM B695-2004 COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL ASTM B696-2000(2004)e1 COATINGS OF CADMIUM MECHANICALLY DEPOSITED 镉电沉积镀层 镉机械沉积锌镀层 钢铁表面锌机械沉积镀层 钢铁表面电解沉积锌镀层 圈及铆钉机械性能的试验方法 螺母表面缺陷 ASTM B766-1986(2003) ELECTRODEPOSITED COATINGS OF CADMIUM ASTM F1135-1999(2004) CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS 紧固件用铬酸镉或锌有机防蚀镀层 标准代号 ASTM F1136-2004 标准名称（英文） CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS 标准名称（中文） 紧固件用铬/锌防蚀镀层 ASTM F1137 2000 PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS 紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层 ASTM F1941-2000 ELECTRODEPOSITED COATINGTS ON SCREW THREADS(UN/UNR)] 螺纹紧固件上电镀层[统一英寸THREADED FASTENERS [UNIFIED INCH 制螺纹（UN/UNR）] C部分：螺栓、螺钉和螺柱 ASME B18.2.1 1996 SQUARE AND HEX BOLTS AND SCREWS(INCH SERIES) IFI-149 2000 IFI-111 2002 IFI-115 2002 ASME B18.5-1990(R2003) ASME B18.9-1996(R2003) ANSI/ASME B18.10 1982(R 2000) ASME B18.15-1985(R2003) IFI-136 2002 ASME B18.6.2 1998 IFI-148 2002 D部分：螺母 IFI ASME/ANSI B18.2.2 1987(R 1999) IFI-145 2002 HEX FLANGE NUTS AND LARGE HEX FLANGE NUTS IFI-128 2000 ANSI/ASME B18.10 1982(R 2000) ASME B18.6.3-2003 SQUARE AND HEX MACHINE SCREW UNTS ASME B18.6.X DRAFT WING NUTS 蝶形螺母 方型和六角机器螺母 HEX COUPLING NUTS TRACK BOLTS 六角法兰螺母和大规格六角法兰螺母 六角轴接螺母 轨道螺栓及螺母 Commentary ON NUTS SQUARE AND HEX NUTS 螺母的解释和说明 方型和六角螺母 STUDS AND BENT BOLTS Slotted Head Cap Screws 螺柱和螺栓 开槽平头螺钉 FORGED EYEBOLTS 锻造环眼螺栓 Track Bolts and Nuts 轨道螺栓和螺母; PLOW BOLTS(INCH SERIES) 防松螺栓 LARGE SIZE HEAVY HEX SCREWS HEX FLANGE SCREWS FLANGE 12-POINT SCREWS ROUND HEAD BOLTS 正方型和六角型螺栓和螺钉(英制系列) 大规格大六角螺钉 六角法兰螺钉 12角法兰螺钉 圆头螺栓 THREADED PROJECTION WELD STUDS 焊接螺柱 标准代号 STANDARD 2002 E部分：高强度结构螺栓 IFI 标准名称（英文） 标准名称（中文） COMMENTARY ON HIGH STRENGTH STRUCTURAL BOLTING 高强度结构螺栓的解释和说明 ASME B18.2.6-1996(R2004) ASTM A325-2006 FASTENERS FOR USE IN STRUCTURAL 用于结构应用的紧固件 APPLICATIONS STRUCTURAL BOLTS,STEEL,HEAT TREATED,120/105 KSI MINIMUN TENSILE STRENGTH 经热处理的最小抗拉强度为120/105 ksi的结构用钢螺栓 ASTM A490-2006 STRUCTURAL BOLTS,ALLOY STEEL,HEAT TREATED,150 KSI MINIMUN TENSILE STRENGTH 经热处理的最小抗拉强度为150 ksi的合金钢结构用螺栓 ASTM A394-2005 STEEL TRANSMISSION TOWER BOLTS,ZINC COATED AND BEAR 输电塔镀锌螺栓和裸螺栓 ASTM F901 2001 ALUMINUN TRANSMISSION TOWER BOLTS AND NUTS 外科移植用精制钴铬钨镍合金 ASTM F1852-2005 TWIST OFF TYPE TENSION CONTROL STRUCTURAL BOLT/NUT/WASHER ASSEMBLIES,STEEL,HEAT TREATED 120/150 KSI MINIMUM TENSILE STRENGTH 经热处理的120/105ksi最小抗张强度拧松式张力控制结构钢螺栓/螺母/垫圈组件 ASTM F959-2005a COMPRESSIBL-WASHER-TYPE DIRECT 与结构紧固件一起使用的可压缩TENSION INDICATORS FOR USE WITH 垫圈型直接拉力指示器 STRUCTURAL FASTENERS F部分：有效力矩紧固件 IFI AN INTRODUCTION TO LOCKING FASTENERS IFI-100/107 2002 PREVAILING-TORQUE TYPE STEEL HEX 有效力矩型钢六角螺母和六角法AND HEX FLANGE NUTS REGULAR AND 兰螺母，常规小尺寸六角系列 LIGHT HEX SERIES IFI-124 2002 TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS IFI-125 2002 TEST PROCEDURE FOR THE PERFORMANCE OF CHEMICAL COATED PREVAILING-TORQUE SCREWS IFI-155 2002 TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT 非金属嵌件有效力矩型螺母的性能测试程序 锁紧紧固件的介绍 标准代号 标准名称（英文） PREVAILING-TORQUE NUTS 标准名称（中文） IFI-143 2002 TEST FOR EVALUATING THE BOTH EXTERNALLY AND INTERNALLY THREADED FASTENERS 评测内外螺纹紧固件扭矩-拉伸TORQUE-TENSION RELATIONSHIP ON 关系的试验方法 G部分： 凹头螺钉 ASME B18.3-2003 SOCKET CAP,SHOULDER,SET SCREWS,HEX,AND SPLINE KEYS ASTM A574-2004 ALLOY STEEL SOCKET HEAD CAP SCREWS ASTM F835-2004 ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS ASTM F912-2004 ASTM F879-2002a ALLOY STEEL SOCKET SET SCREWS STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS ASTM F880-2002 STAINLESS STEEL SOCKET SET SCREWS H部分：自攻螺钉 IFI AN INTRODUCTION TO TAPPING SCREWS ASME B18.6.4 1998 THREAD FORMING AND THREAD CUTTING TAPPING SCREWS AND METALLIC DRIVE SCREWS SAE J933 1998 MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS SAE J81 1997 SAE J78 1998 I部分：机螺钉 ASME B18.6.3 2002 SLOTTED AND RECESSED HEAD MACHINE SCREWS； IFI-138 2002 STRAIGHTNESS GAGING METHOD AND 机械，自攻和滚动螺纹的直线度STRAIGHTNESS LIMITS FOR MACHINE,TAPPING,AND THREAD ROLLING SCREWS J部分：其它小型螺钉 ASME B18.6.2 1998 SQUARE HEAD AND SLOTTED HEADLESS SET SCREWS 开槽平头螺钉和开槽无头紧定螺钉 测量方法 开槽和凹头机螺钉 THREAD ROLLING TAPPING SCREWS SELF-DRILLING TAPPING SCREWS 滚制螺纹自攻螺钉 自钻自攻螺钉 自攻螺钉的机械和质量要求 螺纹成型和螺纹切削自攻螺钉和金属传动螺杆 自攻螺钉的介绍 不锈钢凹头螺钉 合金钢凹头固定螺钉 不锈钢管座凸头及扁平埋头六角螺钉 合金钢凹圆头螺钉和平埋头帽螺钉 六角和键槽圆柱头内六角带肩紧定螺钉 合金钢内六角螺钉

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库IFI第七版紧固件标准目录 - 图文在线全文阅读。