cisco网络交换机配置手册-061201(5)

The system has been interrupted prior to initializing the flash file system. These

commands will initialize the flash file system, and finish loading the operating system

software:

思科交换机路由知识

flash_init

load_helper

boot

Step 5 Initialize the Flash file system:

switch: flash_init

Step 6 If you had set the console port speed to anything other than 9600, it has been reset to that particular speed. Change the emulation software line speed to match that of the switch console port.

Step 7 Load any helper files:

switch: load_helper

Step 8 Display the contents of Flash memory as in this example:

switch: dir flash:

The switch file system is displayed:

Directory of flash:/

3 drwx 10176 Mar 01 2001 00:04:34 html

6 -rwx 2343 Mar 01 2001 03:18:16 config.text

171 -rwx 1667997 Mar 01 2001 00:02:39 c2950-i6q412-mz.121-9.EA1.bin

7 -rwx 3060 Mar 01 2001 00:14:20 vlan.dat

172 -rwx 100 Mar 01 2001 00:02:54 env_vars

7741440 bytes total (3884509 bytes free)

Step 9 Rename the configuration file to config.text.old.

This file contains the password definition.

switch: rename flash:config.text flash:config.text.old

Step 10 Boot the system:

switch: boot

You are prompted to start the setup program. Enter N at the prompt:

Continue with the configuration dialog? [yes/no]: N

Step 11 At the switch prompt, change to privileged EXEC mode:

switch> enable

思科交换机路由知识

Step 12 Rename the configuration file to its original name: switch# rename flas

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说医药卫生cisco网络交换机配置手册-061201(5)在线全文阅读。