8055 power FL-M的最新操作手册_1110(14)

8055 power FL-M的最新操作手册

snoitidnoc ytefaS

CNC 8055

CNC 8055i

·14·PRECAUTIONS AGAINST PRODUCT DAMAGE Working environment.This unit is ready to be used in industrial environments complying with the directives and regulationseffective in the European Community.Fagor Automation shall not be held responsible for any damage suffered or caused when installed inother environments (residential or homes). Install this unit in the proper place.It is recommended, whenever possible, to install the CNC away from coolants, chemical product, blows,etc. that could damage it.This unit complies with the European directives on electromagnetic compatibility. Nevertheless, it isrecommended to keep it away from sources of electromagnetic disturbance such as: Powerful loads connected to the same AC power line as this equipment. Nearby portable transmitters (Radio-telephones, Ham radio transmitters). Nearby radio/TV transmitters. Nearby arc welding machines. Nearby High Voltage power lines. Etc. Enclosures.The manufacturer is responsible of assuring that the enclosure involving the equipment meets all thecurrently effective directives of the European Community. Avoid disturbances coming from the machine tool.The machine-tool must have all the interference generating elements (relay coils, contactors, motors,etc.) uncoupled. DC relay coils. Diode type 1N4000. AC relay coils. RC connected as close to the coils as possible with approximate values of R=220 1 W and C=0,2 µF / 600 V. AC motors. RC connected between phases, with values of R=300 / 6 W and C=0,47 µF / 600 V. Use the proper power e an external regulated 24 Vdc power supply for the inputs and outputs. Grounding of the power supply.The zero volt point of the external power supply must be connected to the main ground point of themachine. Analog inputs and outputs connection.It is recommended to connect them using shielded cables and connecting their shields (mesh) to thecorresponding pin. Ambient conditions.The working temperature must be between +5 ºC and +40 ºC (41ºF and 104º F)The storage temperature must be between -25 ºC and +70 ºC. (-13 ºF and 158 ºF) Monitor enclosure (8055) or central unit (8055i).Guarantee the required gaps between the monitor or the central unit and each wall of the e a DC fan to improve enclosure ventilation. Power switch.This power switch must be mounted in such a way that it is easily accessed and at a distance between0.7 meters (27.5 inches) and 1.7 meters (5.5ft) off the floor.

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说教育文库8055 power FL-M的最新操作手册_1110(14)在线全文阅读。